All posts by Andrew Green

Photos, Transformers

The Good, the Bad, and the Blackout

I listen to a Transformers podcast called WTF@TFW which is run by some of the guys from the Transformers site, tfw2005.com. TFW is one of my favorite sites that I visit regularly looking for news and toy sightings. Of the group of different TF sites, I prefer TFW.

On one of the podcasts I little while ago, they decided to have a contest amongst the fans for a few prizes that were donated to them. The contest’s title: WTF@TFW’s Poncho Photoshoot Contest!

A little background on the contest is in order.

There is a character in Transformers Animated called Lockdown. While being lumped into the Decepticon forces, he is a bounty hunter in the TFA universe. He’s a shady character, and in a few episodes he wore a poncho while hiding in the shadows. The fans have since made a note of his distinctive poncho look. The podcasters and TFW decided to run with it.

So the idea behind the contest was to submit a single photo of a Transformer wearing some sort of poncho. It could be photoshopped, but real ponchos would be favored. The concept behind the photo would be judged for atmosphere, effectiveness of the poncho, and the humor.

I don’t know why I latched onto the idea of submitting an entry for this contest, but it sounded fun and simple.

My immediate idea was to use a Transformers Animated toy called Blackout, based off the 2007 movie character, as my primary subject. As it currently stands, due to TFA’s cancellation in the states, the only way to get this figure was to import it… and import it I did. Being the latest toy I was going to receive after a long drought and his grimacing scowl, he seemed a perfect candidate.

I foresaw Blackout standing in a western town, ready for a gun duel at sunset. He would have his hands (claws really) at his side ready to draw his weapon like the classic spaghetti westerns.

With the idea in my head, I shared it with Jessica and she was game to help get some shots.

After the Japanese Blackout arrived, we went to work fashioning a poncho. Using some quilting squares from the local craft store that looked poncho-esque, I cut out some holes in the middle and fit on Blackout’s first poncho. With some additional fabric, I decided to take my TFA Freeway Jazz and fashion a poncho for him as well to be Blackout’s adversary in a duel.

Initial tests we made inside, with a projector in the background. This didn’t work as I intended because of several factors: no good western town backgrounds to display, the projection wasn’t wide enough, and the lighting was terrible.

We quickly hopped outside into the hot Arizona night to shoot in our front yard. We have some desert landscaping in our front yard (no grass anywhere, even in the back) with some large sandstone boulders along a riverbed. We plopped the two plastic toys down in the rocks and took some test shots.

The “natural” lighting from our porch lights actually lit the scene quite well when using a long exposure. It was a nice soft yellow-orange that matched the hue of the rocks.

The one issue is that we had to place Jessica’s DSLR flat on the hot concrete to get the right angle. This meant I had to lay flat on my stomach on the hot concrete driveway. Lots of tiny little bugs and beetles were also flying around us as we shot.

I was pretty happy with the initial shots but, Jessica was correct in that they needed something a bit more. The ponchos needed a kick… maybe tiny little hats?

Over the next few days, Jessica picked up some tassel-like fringe and some tiny little black cowboy hats. Using some tape and some scissors the ponchos for both characters got a little bit more bling.

We had tried some other shots in the front, but I kept coming back to the idea of blurred shooter in the foreground with Blackout in focus, scowling in the background. We had tweaked some of the positioning and actually started to get some eerie glowing sun / bright full moon shots. The cause was the long exposure we were using coupled with the street light in the background getting blurred. The shot to the left almost made it as my final choice, but the ponchos and character positioning just wasn’t as good as my final selection.

Jessica also took a few cool shots that she had thought up, and the shot to the right is one of those. The two figures look good dueling on the boulder or cliffside.

On the morning that the final submittable photo was due, I looked through my favorite shots and chose the image at the very top of this post. I sent off the image to the podcast’s gmail account and waited.

On a prior contest, a poetry contest, it had taken them a while to judge the entries and choose a winner. In addition, their 100th podcast was coming up and that was bundled with the fact that Botcon 2010 was also just around the corner. I did not expect the crew to pick any winners anytime soon. The only hint that I had to the status of the contest was that they posted that there were 41 entries.

Much to my surprise a week before Botcon I got a stealthy private message on TFW from one of the guys on the podcast, Vangelus. He coyly asked if myself and three others in the same message were going to be attending Botcon. That sure was strange and out of the blue, especially when there were 4 prizes for the contest…

As it turned out, just a little while later when I got a response from him, I did end up placing in the contest. In fact, I got third place out of the 41. And in addition to that, I got to pick between 2 of the remaining prizes: Alternity Bumblebee and Japanese Animated Lockdown, neither of which I have.

Of the original 4 prizes, Alternity Bumblebee would have been the prize I would have picked from the 4. As luck would have it that was the one I got to pick!

I responded with my desired prize and was told not to tell anyone that I won until podcast episode 100 was up for everyone to hear. At this point I was feeling pretty good and proud of my photo.

A few days pass and just before Botcon, WTF@TFW episode 100 was released. That morning I loaded up iTunes, downloaded the podcast, and synced it for the drive to work; ready to hear the results from the crew.

Another odd occurrence that preceded episode 100 was that the crew was joined by a very special guest on episode 99. That guest was Transformers Animated art director and character designer Derrick J. Wyatt. DJW is a enormous Transformers fan that got to work on the last TF cartoon series. The sleek, simple lines and designs of the characters were mostly his doing. In addition, he added lots of fanservice into the show. He joined the crew on episode 99 and gave his thoughts on the latest TF news. As an additional surprised, he also was part of episode 100.

About 5 minutes into the 100th podcast, they began talking about the contest winners. They spoke of the first two guys and their entries, as well as the number of votes they got for each member of the podcast team. First place had 18 points, second place had 8 points, and then third and fourth tied at 6 points apiece.

A tiebreaker was needed. That tiebreaker was Mr. Derrick J. Wyatt. While they were recording, Vangelus sent Derrick the third and fourth entries to cast his vote. After a bit of deliberation, he chose my entry with Blackout! He also commented favorably on Blackout’s poncho fabric. Having a member of the crew responsible for TFA choose my entry was an extra layer of icing on top winning third place. That really made it special.

So at the end of it all, I had won third place in the WTF@TFW Poncho Photoshoot Content. I, along with Jessica, had taken a great photo and we were proud of our accomplishment. I also gotten a free Transformer out of it. In the near future, I should be receiving Alternity Bumblebee (seen below) in the mail… all thanks to putting a poncho on a Transformer.

Art, Customs, Transformers

Shrapnel – My first custom Transformer

Shrapnel - Robot mode (custom)

Back in December 2009, I was fortunate enough to procure an Iwata 0.2mm airbrush, lots of supplies, a medium sized air compressor, and pretty much every Createx acrylic paint currently available (thanks Jessica). The point of getting the airbrush was because I had been talking about making my own custom Transformers. I had made the one at Botcon, picked up a couple of duplicate figures intended as customs, and I eventually wanted to make an orange Aveo Transformer to match my real car. So I now have an airbrush in my possession and toys to customize.

I originally played with the airbrush shortly after getting the set, but ended up just being frustrated. Using some random small Venom action figure from Goodwill, I tried repainting it red to redeco him as Carnage. The paint didn’t flow smoothly, it globbed up, the paint flaked when touched, and the pinpoint detail the 0.2mm was supposed to have just wasn’t there. It was not a great first impression.

Discouraged, I put it away for several months.

Then last month, I felt like trying it again. I hadn’t been creative in a while and it felt like a good time to give it another whack.

So at the same time I received the airbrush, I had received some extra Revenge of the Fallen Transformers meant for customizing tests. Using three of those figures, I had it in my mind to re-purpose them as movie-themed Insecticons:  Shrapnel, Kickback, and Bombshell. All deluxe class vehicles with similar color schemes.

I started by digibashing the figures. Using some macro photographs I took of the toys, I loaded up Photoshop and recolored the original plastics. Using photos of the original G1 toys, photos of the Robot Heroes, cartoon screenshots, and other images I tried to match characteristic details of each character in their redeco. I didn’t spend a whole lot of time getting the details exactly perfect; as I just wanted a base from which to work on with the actual paint. I tried to use colors that matched paints I already had so I wouldn’t have to mix unique colors. I thought this digibashing process would take quite a while, but I cranked all three rough redecos out in about 2 hours.

The next step was choosing which one to start with, and then taking it apart. Jolt, the basis for Shrapnel, seemed like a good starting point with a larger number of screws versus pins. Pins can be a pain to remove and put back, so I saved the other two figures for later. Piece by piece I disassembled Jolt into as many parts as I could, all along keeping track of each screw and where they went by taping them to sticky notes. Screw lengths and widths are not uniform across the figure as I found out at Botcon. I had to make sure each screw went back where in came. Each part was then separated into separate bowls that were grouped by color.

I decided to start with the pearlescent yellow that was for the windows to mimic the yellow/gold plastic on the original. I knew I wouldn’t be able to keep the translucency of the blue windows, but I figured the paint would look good against the other colors. The initial bits of yellow would also not need to be masked off making it a good starting point. I also tried my hand at the pearlescent silver bits with his pincers on his back.

Unfortunately as I came to find out, the non-opaque paints I have do not cover well nor spread well. I had not figured out the correct mixture of paint to illustration base at this point and so I slathered each piece just trying to get it to coat. The paint was thick and much of it was wasted. I did not start with an opaque base and so most of the paint just didn’t stick. I also had not sanded each piece prior.

I also was finding that the airbrush was clogging a lot. Constant cleaning and disassembling of the airbrush were common occurrences. In addition, I was quickly running out of the small bottle of the airbrush cleaner I had. Halfway through the painting process while trying to clean the brush, I ended up stripping the threads off the 0.2mm nozzle. That put a delay in the customizing, after which Jessica headed to Phoenix and nicely picked up both a replacement 0.2mm nozzle and a 0.3mm nozzle (which works via some slight jerry-rigging). That was an additional $80 I had not planned on…

I fumbled through the rest of the colors over the span of 2 weeks, finding better paint mix ratios and seeing that the opaque colors like white, black, and dark colors don’t need much spraying before seeing results. I tested my hand at masking, unfortunately finding that some pieces need to be perfect and ended up with some bleeding such as black streaks in the yellow. Also, the Createx paints don’t cure unless they are heated with a air dryer or heat gun. Even after that they still show fingerprints and smudges. Next time I will try actually using the clear coats intended for finished pieces.

So I had all the pieces mostly painted, they had been heat cured, and I felt anxious to get the figure together. Seeing it all in parts strewn across the table kept irking me.

Starting with his arms, I quickly found out that because I had painted so thick and/or the paint wasn’t fully cured, parts which rubbed or twisted against others rubbed the paint off in spots. Ball and swivel joints rubbed down to their base plastics which was a bright electric blue. Furthermore I found that if pegs had been painted, the pieces wouldn’t fit together cleanly or smoothly. I ended up breaking the base peg on his left knee trying to dry fit the part. At least the screw and other parts that followed still keep him together. On later pieces I ended up scraping away unnecessary paint on these pegs with a exacto knife so the pieces fit better.

Shrapnel - Car mode (custom)Once fully together, I started to paint the small details. Red eyes, detail highlights, headlights, bumper trim, and the like.

Transforming Shrapnel, or even moving some joints, is not as smooth as I would have hoped. His parts are very tight due to the paint, and he is quite hard to actually get transformed between modes. In addition, the colors that I had don’t quite match up to what I had planned. The yellow is not quite orange enough, the purple is a bit dark, and the silver is just a bit too white (even though I can’t quite get the chromed look with just paint).

But I can now honestly say I’m glad to have this first self-designed custom Transformer completed. He does look quite nice on my desk even with his imperfections.

Shrapnel and Jolt - Robot modes

The question now is when I’ll get to the other two Insections I had digibashed. I must admit I’m a bit burned out at the moment as the process wasn’t what I consider fun. Also, do I make changes to the coloring to match what I wished the scheme was or keep the other two the same to match how Shrapnel turned out?

I guess we’ll see if and when I get to Kickback and Bombshell.

BotCon, Customs, Transformers

BotCon 09 Customizing Class

4 Comments

Back to the BotCon 09 posts…

After picking up my boxed set, the next event I had scheduled was the all day Thursday customizing class. I didn’t quite know what to expect with the class, but I knew that they only had 2 classes the entire ‘con with 50 seats each. I had heard that they filled up immediately, and so if you had any inkling of taking one of the classes you needed to jump at the opportunity.

The class sounded like a good idea, and so I tried to reserve my seat when I faxed in my registration. As it happened, I was quick enough and luckily I got in under the cutoff for the Thursday class.

Customizing class setup Part tray and tools Customizing class part sheet

The class was held at the Colorado room of the Hilton Pasadena. The room was somewhat small and had several long tables pushed together, which had been draped in plastic. In front of each seat was a foam tray with a couple of tools inside. There was also a parts guide and a small booklet with information about the class and the character we would be building.

As it turned out, the toy we were going to construct was Shattered Glass Thunder Clash. Thunder Clash was one of the exclusive boxed set toys from this year based on the Energon Rodimus mold. Shattered Glass is the universe created by the Transformers Collectors Club that is essentially the mirror universe of the Transformers with Evil Autobots and Good Decepticons. Several of the Rodimus toys and completed SG Thunder Clash toys were also sitting on the table for reference.

I was kind of disappointed when I saw Thunder Clash sitting on the tables, as I was not a fan on this toy from the pre-release photographs. I also wasn’t a fan of the character, and wished it might have been any of the other members of the exclusive toys. However, we were going to be making SG Thunder Clashes and so therefore so would I.

Customizing class partsShortly after everyone had arrived for the 9am start; the host for the class, Shawn Tessman, introduced himself and discussed what we’d be doing. He and other volunteers then handed out bags (containing even more bags) with all the toy parts still on their plastic sheets. We had to then take each sheet and cut/twist off each part and sort them into quadrants on the foam tray. We would also need to trim any flashing still left on each part so they could fit together snugly when completed.

There was one slight hiccup that they caught during Wednesday’s class and it seemed some bags had 4 of a part, which other bags had 4 of another part. So once we got the parts untwisted, we simply traded 2 of that part with our neighbor for 2 of their part.

The parts themselves were the exact same unpainted mold as Wings of Honor Thunderclash, and it was quite interesting just how plain or “naked” this toy looked. Paint applications really are a key part of each figure.

Customizing class partsThe next step was the daunting task of separating out all the screws, pins, and springs. They recommended that you lay down strips of masking tape to group each set of pins together. Differences between the lengths/widths of each pin were very hard to determine and the photocopied guide sheet wasn’t perfect (nor could you expect it to be). This by far took the longest and even then I didn’t match them up perfectly as I came to find out.

So with all the prep work done, it was time to start building. Each quadrant of the tray was a different body part such as a left leg, right arm, torso, etc. In the instruction booklet, each body part had an exploded view showing each individual part, what order to put them together, and what pin or screw you’d need.

In some places where there was just a pin, or a larger screw, we’d need to bore out the pin hole with a mini-borer. Sometimes the parts would be too tight if we didn’t clear out the holes, and so we needed to make sure parts could rotate correctly and not have stress fractures.

Customizing class diagram and partsSlowly my first part, the left arm, came together. It took a little thinking to get started as you had to make sure you wouldn’t screw up. Lots of parts were pressure fitted once combined and so you had to make sure it was right. In addition, some parts needed to be pressed together with a hand-held leather punch (like pins) or hammered with a setting pin at Shawn’s desk.

I kept plugging away at parts and eventually hit on my first snag. I started to screw together one of the hands, but had placed the wrong fist on that hand. In my attempt to fix this I stripped my first screw, and realized that you really did have to put this together correctly the first time. Regardless, arms, hands, and legs were coming together.

The process began picking up speed as I got comfortable with how these toys are built. The construction did start becoming a bit more complicated, especially in areas like the torso where the Powerlinx feature was.

Arm and hand Torso and left leg Lower body

There were a few more missteps along the way: forgotten parts, screws that were too big, over tightening parts, taking things apart to make sure they were right, etc. An example of one of those errors is in one of the pictures above (the one with two legs). You can see a small dimple at the top of his left leg that isn’t on his right leg. That dimple was created by using a screw that was too long and screwing it too far. Doing so made the screw tip poke through and almost push through his left hip. I wasn’t alone with having errors like this, so I don’t feel too bad.

Naked Shattered Glass Thunderclash
The class had started at 9am and finally by a little after 1pm I had completed the base figure. I hadn’t taken a break for lunch (knowing that my time was limited) and it still took 4 hours to build this guy. I really didn’t think it would take that long, and I had expected to spend most of my time painting and tweaking the figure when I had initially signed up for the class.

However now that I was done building, it was time to paint.

The only set of personal tools I had brought were my own paintbrushes, and I’m glad I did. We were only provided with one to use (along with some toothpicks) and I wanted to have a few more options. We had access to lots of enamel paints, some metallic but most were flats. An airbrush area was also available, which I ended up using later.

I didn’t have any idea what to go with as far as a color scheme. It was suggested to just enhance his normal non-painted colors since the Wings of Honor Thunder Clash had lots of paint apps, and so by leaving him mostly cream/white would make him look evil. I instead decided to go with navy blues and burgundy red colors, with hits of purple.

Painting the figure was a lot harder than I had anticipated. The enamels were pretty thick and weren’t the easiest to get detail work with (at least in the short time remaining). We could use toothpicks to drop bits of paint into spaces (like the face) and it would fill in the crevices. I did my best with what I thought would work. I was happy with my results for the most part, but I had wished I had not used a metallic purple paint. This particular paint was very watery and so did not cover well and also dripped. The clean lines I had envisioned ended up being leaky and streaked. Oh well.

I had used the airbrush station as well. Like most of the others, we painted his traditionally clear blue weapon a flat black. With Shawn’s help I was able to get full coverage easily and I was happy how his gun looked in the end.

By a little after 3pm I had finished painting my personal customized Shattered Glass Thunder Clash. The volunteers had to go set up for that evening’s club store, and so the class was drawing to a close. I packed up my stuff, thanked the crew, and headed back to the room.

Painted Shattered Glass Thunder Clash

I would later do some additional adjustments once I got back home; like fixing his left hand, tightening screws, and adding additional stickers. However, it still had taken me a whole day to complete a single Transformer.

BotCon toy count to date: 21

Transformers

Transformers: Revenge of the Fallen

Revenge of the Fallen Poster: BumblebeeI’m taking a break from the month-long delayed BotCon posts to comment on Transformers: Revenge of the Fallen.

I initially had planned on seeing the flick, tonight Tuesday June 23 at 12:01am at San Tan Village. I had pre-purchased 2 tickets for myself and Jessica. I had planned on taking Wednesday off to recoup from the long night in line and in the theater.

My timetable jumped up a little over a day when Jessica was able to procure 2 passes to the pre-screening event being held at Tempe Marketplace’s Cine Capri, at 7pm on June 22. A co-worker of hers got the pair of tickets from a relative, who in turn won them from a contest. Knowing that I was a fan, and not wanting to use them himself; I got to see the film early.

Jessica actually got the tickets around noon on Monday, and quickly rushed over to the theater to get in line. These tickets weren’t guaranteed seats, and so we needed to save our place in line. About 30 minutes later I arrived.

By the time I got there, the line that was formed inside was 90% full with about 75 people. Some folks had been there since 6am, just waiting in line. Lots of folks had folding chairs, which spurred myself to go pick up some similar chairs from Target for $10 a piece. There were other lines for radio content winners (maybe 100 people total), but there was also a line outside that was also growing and ended up wrapping around the building. They provided water to these folks, but it was still damn hot out there and they weren’t guaranteed seats (and eventually most wouldn’t even make it in).

So Jessica and I sat there, listening to iPods and talking to folks for about ~6 hours. We had waited in tons of lines at BotCon and so this was yet another bout of waiting. I was really tired of these lines, but it was a special event and we were going to see it before the Hollywood premiere which was a nice bonus.

Once we slugged through the long wait, we were left to get the only seats we had access to: 3 rows from the front and to the far right. They were not optimum seats by any means, and in addition the entire upper middle section was roped off for press and vip’s. Regardless we had seats.

After a quick bit of routines from ASU cheerleaders, radio contests, and then a short intro from Todd McFarlane, we got to finally see the movie I had waited so many months to see.

Transformers: Revenge of the Fallen is an interesting movie. Not great by any means, and in my opinion not as good as the first one. The shots of the robots do seem to be better framed, but there is still lots of blur and lots of debris flying everywhere. In addition there is still lots of camera shake and obscuring foreground objects.

The new Transformers they introduce are not used very well, and many are disposed of very very quickly. In addition, lots of characters seem to have multiple copies just to serve as cannon fodder. A good example is the use of the Constructicons. Great to finally see movie versions, but they are almost disposable characters like clones.

The plot is somewhat hard to follow and honestly not all that interesting. It is passable, but it could have been more. It almost seems like this movie suffered from a bad edit as you can tell bits and pieces that had been cut (and been in trailers) might have helped flesh it out further. It was still over 2 hours so it didn’t really need to be much longer.

DevastatorThe biggest disappointment for me was Devastator. I was really looking forward to seeing the big guy and what they would do with him, but like most others have since stated, he is wasted. From the trailers, and even the clip at BotCon, it seemed like he’d be better utilized. It is epic when he is combining together, but then he gets owned pretty easily for such a massive character. Also the humor at his expense on the pyramid is quite crude and pointless.

In fact, most of the humor is way way cruder than the first. Lots of the jokes and occasional swear words really don’t fit. Drug jokes, sex jokes, etc. I know its PG-13, but the stuff they thought would be funny was just plain dumb.

In the end, I’m glad I saw it. Not quite what I had hoped (I even tried to keep my presumptions low), and maybe it kinda fell flat because of how it was presented. The film was out of focus and our placement in the theater really made the whole experience a semi-dud. Not much too complain about though when they are free and early.

On the other hand, I’m quite happy with the toys they have released so far for the movie. In addition, I’m hoping when I see it again in IMAX the visual experience will be better.

As it stands though, I really can’t recommend the film to the casual moviegoer. Or at a minimum, I’d recommend keeping your expectations low. I like summer popcorn movies, and I’m not picky about movies having to be perfect, but the pieces just didn’t come together on this one the way they should have.

The toys on the other hand are quite awesome.

BotCon, Transformers, Uncategorized

BotCon Early Registration and Wings of Honor

So after finishing dinner at Pinks, we headed back to the hotel and then over to the convention center. On that Wednesday evening, we had the privilege of getting in line for BotCon early registration. Since I had a customizing class the next day, we were able to get registered and pick up my box set before the regular attendees.

We got in line around 7pm for when they opened the doors at 9pm. The convention as a whole was being held at the the Exhibition Hall and Ballroom portion of the Pasadena Convention Center. Although the line outside was fairly short, it was foreshadowing what was to come.

Early RegistrationOnce inside, they split us up by last name. Dealers received special treatment and got their own instant service line. It seemed that lots of these folks had purchased multiple sets, and many small groups were walking out with 4-5 of the Wings of Honor boxes. Some fans also decided to open their toys right there in the center immediately after obtaining them.

Getting my boxed setAfter about 45 minutes, it was my chance to go up and claim my first convention exclusives.

We were greeted by a very enthused convention worker who pulled together everything that I got with my Primus Package. Included with my whole package was:

The final item I received was the very limited lapel pin of the Elite Guard faction symbol. I was able to be one of first 100 people to order a Primus or Iacon Package, and for doing so I received this pin. It was an unexpected benefit of faxing in my registration on the first day several months ago, and it is nice little unique trinket that I ended up pinning to my badge’s lanyard.

Limited Edition Lapel Pin

Having finally completing the registration for my first convention, let alone a BotCon; we took at my new toys in hand and walked back to our hotel.

Once back in the room, I quickly opened the Wings of Honor boxed set to get a look at all the figures. Now these figures were somewhat rare in that you couldn’t get them in stores, but I open and play with my toys. This box was not going to remain untouched.

Each one was carefully taken out of the foam box and transformed. Only one of the toys (Scourge) was from a mold that I previously owned, and so each toy initially dumbfounded me as I attempted to transform them. At first I wondered where all the tech specs / instructions were at. How was I supposed to correctly transform these guys?

Wings of Honor toys in foam

Luckily underneath the foam inset were the instructions and all the remaining pieces of the boxed set including several cyber-planet keys, weapons, and missiles. I also opened up the bagged Leozack and transformed him.

Wings of Honor toys

By this time it was roughly midnight and we very tired after a long day of driving. This constant tired feeling ended up being a common theme across all the days of the convention with the long, late nights.

Wings of Honor boxed set and souvenirs Primus Package souvenirs Day 0 Haul

Needless to say after having these items in hand I was getting stoked for the convention. I finally had my first exclusives and was convention ready. The next stop was some sleep and then my customizing class early the next day.

You can see more detailed photos of each toy and item of the Wings of Honor / Primus Package by visiting this Flickr gallery.

BotCon toy count to date: 20

BotCon, Transformers

Driving to BotCon and Pink’s

We stayed at my folk’s house a final night before driving to Pasadena on Wednesday morning. The plan was to casually make our way into the Los Angeles area by early afternoon.

Of course, there are many Targets and Wal-Marts on the way along I-10 to check for early toy releases. Plus we had budgeted a little time for these little stops along the way.

The first Wal-Mart had the Revenge of the Fallen themed limited edition Strawberried Peanut Butter M&M’s. They aren’t nearly as bad as they sound and taste more peanut buttery than strawberry.

Vector PrimeJust after crossing the California border, we saw a new Target off the side of the road which we backtracked to on a hunch. The hunch ended up working because I was able to finally pick up the voyager class Vector Prime, and at a discount no less. I had never seen this figure in all my searching, and it was nice picking him up. My classics had be relegated to storage bins but it was probably more sound to get this guy now that at a possible markup in the con’s dealer room.

A little bit further down near Indio we came across another Target that we felt lucky about. Fortune smiled on us and it led to more pre-release RotF toys and I was able to pick up 3 more deluxes: Sideswipe, Rampage, and Breakaway. I really didn’t expect to find any more of these guys before the convention. I thought we’d just take the occasional break by stopping for a drink at these stores, but these were an added bonus.

SideswipeSideswipe is definitely the coolest looking of these three, and his package was opened shortly after leaving the store while we were still driving. He has a very sleek look and looks to be an interesting character that they added to the film. He isn’t quite like his old G1 self, and Sunstreaker is nowhere to be found, but I look forward to see what they do with him.

Having hit the outskirts of town, we decided to stop visiting stores and just head to the hotel to drop off our stuff and then head out to an early dinner. The menu for this first day of the trip was Pink’s Hot Dogs.

Last time we visited the LA area, we tried to hit up Pink’s for a quick bite. Little did we realize on that trip it was midday on a weekend and the line was around the building and appeared to wrap several times.

However this time on an early Wednesday afternoon it was much different. We parked along a nearby street and got into a line of about 15. A few minutes later we had one plain dog, one Brooklyn Pastrami-Swiss Cheese Dog, fries, onion rings, and two bottled drinks.

The food was above average, with the onion rings standing out and the fries being fairly bland. It was worth visiting just for the experience and would recommend it if you ever visit Hollywood.

Pink's Hot Dogs Pink's Hot Dogs Pink's Hot Dogs

After Pink’s we tried a few more local Targets located on the way back to the hotel to no avail.

That evening is when the real festivities began though as it was time to get into line to pre-register. Soon I would have my first ever convention exclusive toys…

BotCon toy count to date = 14

BotCon, Transformers

Days leading up to BotCon

Leader Optimus PrimeSince there is just so much content to write about our trip to BotCon this year, I’m going to be splitting it up into multiple posts and maybe going into detail about specific things. So here is the first bit.

I’d say the start of the BotCon adventure began with my parents’ house being broken into the weekend before the convention. They had been out of town on a trip to Ireland and my sister, Jessica, and myself had been watching the house while they were gone. Unfortunately during one of the spans between us checking up on the home, the front door was broken into.

Nothing apparent was stolen, but it did necessitate us having to stay over at the house for several days, installing a metal security door at midnight, and travelling between their home and ours multiple times.

I suppose a good thing that happened while we were there was that Fry’s Electronics released some Transformers: Revenge of the Fallen toys early on Friday May 22. The toys weren’t officially supposed to be available until May 29th, and most places that had them on the shelves weren’t allowed them to be sold. In fact BotCon was advertising the fact they’d have these first figures available exclusively early and with special first release stickers. Not one to wait, Jessica and I headed over there after breakfast and picked up my first RotF figures: Leader Optimus Prime, Leader Megatron, Deluxe Bumblebee, and Deluxe Sideways.

So that was a nice little surprise to a fairly rough start of a weekend.

Robot Replicas Optimus PrimeFast forward a few days to Memorial Day and on another trip back to the folk’s house for another sleepover and the Tempe Marketplace Target decided to slip some more RotF toys early. This trip netted Deluxe Wheelie, Deluxe Chromia, Deluxe Soundwave, Gravity Bot Bumblebee, Bumble Spud, and a Robot Replica’s Optimus Prime.

So here I was just 3 days before the official start of the convention and I already had 10 toys from RotF. That would be at least 10 less ‘first release’ stickers than I planned and less I’d have to drive home with, or at least so I thought…

BotCon toy count tally to date = 10

Transformers

Cute Ravage?

Robot Heroes - Revenge of the Fallen RavageWhile I adore the classic Transformer Robot Heroes line of figures, I never could appreciate the original Transformers 2007 movie versions. The movie’s characters were just too complex to “cute-ify” like the old G1 gang.

I think there will have to at least be one set purchased from the new movie this go round. This adorable little movie Ravage is just too cute to pass up. I mean look at that spiked tail and hind leg missles. It’s just too adorable.

Not quite as cute as standard Robot Heroes Ravage, but worthy of a purchase nonetheless.

Here is what he looks like in the film, and here’s a bonus link to Chicken-mode Ravage.

Transformers

Transformers Collection 1984-2009

2 Comments

My Entire Transformers Collection - March 2009So how did I spend part of my Spring Break last month? Why I cataloged each and every piece of Transformers stuff that I own, everything from back in 84′ to current day!

So that I had a complete listing of my stuff before Botcon 09, I pulled down every storage bin down from the attic and gathered the others from my closet. I then proceeded to transform them into robot modes and separate them by series and size. The photo to the left is the fruit on my labors after about I’d say 8 full hours of work. They just barely fit onto our kitchen table and counter. It includes every toy and statue that I own, including the few duplicates.

My Entire Transformers Collection - March 2009So once I was done with getting them into robot modes, and after a night’s worth of sleep, I just had to transform them back into their alternate modes. That process took another half-day and the photo to the right is the final alternate mode display.

A large majority of these toys, especially the old school Generation1 toys, were gifts from multiple birthdays and Christmases. They go way back to Windcharger and Sunstreaker as the original toys I received. Save for a few unique pieces, each toy was purchased back when it was available for the regular retail prices. I don’t spend large amounts of money to get individual figures or old G1 figures. These are my figures from back in the day along with recent retail purchases.

It sure was a lot of work, and although it looks like there are hundreds of Transformers strewn about, I was shocked to see the final count so small. Below is the breakdown by series.

Series Count
Generation 1 54
Generation 2 2
Movie 2007 17
Classics / Universe 43
Animated 41
Miscellaneous 2
159
Statues 44
Non Toys 164
208
Total 367

So the total count is quite less that what I had expected, but I still have tons of different items. Generation 1, Generation 2, Classics/Universe, Movie, Animated, Robot Heroes, Mighty Muggs, comics, books, and lots of other wacky items. If you are interested, you can see the complete itemized list here. Individual and group photos of almost all of the items can also be seen by visiting the Flickr set for the collection.

Of course the collection will continue to grow with items purchased at Botcon, the final Transformers Animated toys, as well as the entire Revenge of the Fallen toys from the upcoming movie sequel.

The key to my collection is that these toys have and always will be kept out of their packages. They will be played with, transforming back in forth many times between modes. In addition, I don’t keep these toys because they are “worth” anything. I keep them because they are a part of my childhood and an extension of that childhood into my future.

Transformers for me are something that I really enjoy, and I don’t ever see myself selling a single one.